Personal Stamp Making Machine Mini Handy Stamp Making Machine Stamp Making DIY

Description

Personal Stamp Making Machine Mini Handy Stamp Making Machine Stamp Making DIY
Using the sensitivity of a special material (optical plate), the desired content and graphics are left behind by the machine's exposure, and unwanted areas can be brushed off in the water with a brush. Thereby, a piece of concave and convex stamp is obtained, and the effect of making a seal is achieved.
This optical seal machine is only suitable for personal use and is not suitable for shop opening, because it is made in a simple way (only a bumpy stamp!)
product information
Product Name: Optical Stamp Making  Machine
Model: Min 4
Working area: 140*130mm (length * width)
Working voltage:
220V/50HZ
Power: 18w
Engraving accuracy: 0.0250mm
Life: 20,000 hours
Steps:
1. First, print the seal to be printed on the sulfuric acid paper through the laser printer through the software on the computer.
2. Cut the optical plate down (slightly larger than the printed seal). Remove the protective film from the inside and put it into the machine. Then put the printed paper and optical plate tightly together, and finally transparent. The optical glass is pressed on top.
3. Turn on the machine, press the red button for 2 minutes, wait until the light is automatically turned off, remove the optical plate, then you will see the shadow of the seal on the optical plate.
4. Place the optical plate in hot water of about 60°, then brush the optical plate quickly until the hand touches the obvious bump.
5. The last step is to cut the prepared seal with scissors and stick it on the rubber, then use the stamp pad to use it.
package list:
Optical machine + optical glass + rubber stamp 1 + brush + double-sided adhesive + printing pad + optical plate (15cm * 20cm) 2 sheets + 17 sheets of sulfuric acid paper
Please be free to contact us if you have any request.